1. 0.02Hz~5MHz, LED display
2. Wide frequency range : 0.02Hz to 5MHz in 7 range4-in-1 sweep, function & pulse generator and frequency counter
3. Versatile waveforms : Sine, Triangle, Ramp, Pulse sawtooth and DC output
4. Built-in 6 digit internal and external counter display (Max. 50MHz)
5. Internal and external linear sweep control from 1 : 1 to 100 : 1
6. Low distortion factor less than 1% at 0.2Hz to 100kHz
7. TTL and CMOS leveled square wave output
8. Variable DV offset control
9. Variable symmetry to generate sawtooth and pulse waveform
10. Variable output level control with 20dB attenuator and amplitude control
FREQUENCY - Output waveform : Sine, Triangle, Square, Pulse sawtooth, Ramp, TTL, CMOS
- Frequency range : 0.02Hz~5MHz in the 7 ranges
- Frequency accuracy : ± 1 count
EXTERNAL
FREQUENCY CONTROL(VCF) - Input voltage : 0 to 10V(DC + AC peak)
- Frequency variable range : 100 : 1 or more
- DC offset : ±10V(without load), ±5(with load)
- Symmetrical variable range : 10 : 1 to 1 : 10 or more
SINE WAVE - Distortion : less than 1%(0.2Hz ~ 100kHz)
SQUARE WAVE - Rise / fall time : less than 25ns
TRIANGLE WAVE - Linearity : less than 1% up to 100kHz and less than 5% up to 2MHz
TTL OUTPUT - Output : TTL level
- Rise/fall time : less than 25ns
CMOS OUTPUT - Output : 4V~15V ± 1V, continuously variable
- Rise/fall time : less than 40ns (at Max. output level_
SWEEP - Width : 1 : 1 to 100 : 1
- Rate : 20ms to 2s (50hz to 0.5Hz)
- Internal sweep : linear
- External sweep : by means of VCF input
OUTPUT - Output voltage : 20Vp-p (open circuit), 10Vp-p(into 50Ω)
- Attenuator : -20dB
- Impedance : 50Ω ± 5%
FREQUENCY
COUNTER - Display : 6 digit green LED(0.2Hz ~ 50MHz)
- Accuracy : time base error ± 1 counter
- Input sensitivity : 100mV on kHz range and 300mV on MHz range
- Max. input voltage : 150Vrms at 1kHz
GENERAL - Operating environments : 0℃ ~ 35℃, 85% RH
- Range for guaranteed : 25℃± 5℃, 75% RH
- Power requirement : AC 115 / 230V ± 10%, 50/60Hz
- Power consumption : approx. 20W
- Dimension : 255mm(W) X 80mm(H) X 260(D)
- Accessories : power cord, fuse, operation manual, BNC cable